Newland BS8060 Piranha, User Manual

Page: 26 / 232

12
Bluetooth Mode
Bluetooth Mode (default)
When the scanner is in the Bluetooth mode, you can select a desired profile by scanning the appropriate
barcode below.
HID (default)
SPP
BLE
There are three types of data transmission via Bluetooth: Synchronous transmission, Asynchronous
transmission and Batch transmission.
(1) Synchronous transmission (default): When you scan barcodes, the data will be sent to
smartphone/tablet directly. If you are out of Bluetooth service range, scanned data will be lost.
(2) Asynchronous transmission: When you are out of Bluetooth service range, scanned data will be
stored in the flash memory. Once you are back to service range, the data will be sent to
smartphone/tablet automatically. The scanner will automatically remove it from the flash memory after
smartphone/tablet receives the data.
(3) Batch transmission: Scanned data will be stored in the flash memory no matter whether you are in
Bluetooth service range or not. You may send the stored data to smartphone/tablet in one of the following
ways: (i) hold down the Function button on the scanner for 3 seconds (Note: To suspend/resume data
transmission, press the Function button briefly.); (ii) scan the
Transmit Stored Data barcode; or (iii) send
the corresponding serial command to the scanner (See the Serial Programming Commands ).