Newland BS8060 Piranha, User Manual

Page: 192 / 232

178
Terminating Character Suffix
Enable/Disable Terminating Character Suffix
A terminating character such as carriage return (CR) or carriage return/line feed pair (CRLF) can only be
used to mark the end of data, which means nothing can be added after it. A terminating character suffix
cannot exceed 7 characters.
Disable Terminating Character Suffix Enable Terminating Character Suffix (default)
Set Terminating Character Suffix
To set a terminating character suffix, scan the Set Terminating Character Suffix barcode, the numeric
barcodes that represent the hexadecimal value of desired terminating character(s) and the Save
barcode.
You can also quickly set the terminating character suffix to 0x0D (CR) or 0x0D,0x0A (CRLF) and enable
the transmission of it by scanning the Terminating Character 0x0D (CR) or Terminating Character
0x0D,0x0A (CRLF) barcode below.
Terminating Character 0x0D (CR) Terminating Character 0x0D,0x0A (CRLF) (default)
Set Terminating Character Suffix
Example: Set the terminating character to
“0x0A” (LF)
1. Scan the Set Terminating Character Suffix barcode.
2. Scan the numeric barcodes
“0” and “A” from
Digit Barcodes (1D Scanner) in Appendix.
3. Scan the Save barcode from Save/Cancel Barcodes (1D Scanner) in Appendix.