Newland BS8060 Piranha, User Manual

Page: 194 / 232

180
Custom Prefix
Enable/Disable Custom Prefix
If custom prefix is enabled, you are allowed to append to the data a user-defined prefix that cannot
exceed 11 characters.
Enable Custom Prefix Disable Custom Prefix (default)
Set Custom Prefix
To set a custom prefix, scan the Set Custom Prefix barcode and the numeric barcodes representing the
hexadecimal values of a desired prefix and then scan the Save barcode. Refer to ASCII Table in
Appendix for hexadecimal values of characters.
Note: A custom prefix cannot exceed 11 characters.
Set Custom Prefix
Example: Set the custom prefix to
“CODE”
1. Check the hex values of
“CODE” in the ASCII Table. (“CODE”: 43, 4F, 44, 45)
2. Scan the Set Custom Prefix barcode.
3. Scan the numeric
barcodes “4”, “3”, “4”, “F”, “4”, “4”, “4” and “5” from
Digit Barcodes (2D Scanner)
in Appendix.
4. Scan the Save barcode from Save/Cancel Barcodes (2D Scanner) in Appendix.