Newland BS8060 Piranha, User Manual

Page: 185 / 232

171
Custom Prefix
Enable/Disable Custom Prefix
If custom prefix is enabled, you are allowed to append to the data a user-defined prefix that cannot
exceed 11 characters.
For example, if barcode data is “123” and custom prefix is “AB”, the host device will receive “AB123”.
Disable Custom Prefix (default) Enable Custom Prefix
Set Custom Prefix
To set a custom prefix, scan the Set Custom Prefix barcode, the numeric barcodes that represent the
hexadecimal value of desired prefix(es) and the Save barcode.
Note: A custom prefix cannot exceed 11 characters.
Set Custom Prefix
Example: S
et the custom prefix to “CODE” (Hex: 0x43/0x4F/0x44/0x45)
1. Scan the Set Custom Prefix barcode.
2. Scan the numeric
barcodes “4”,“3”,“4”,“F”,“4”,“4”,“4” and “5” from
Digit Barcodes (1D Scanner)
section in Appendix.
3. Scan the Save barcode from Save/Cancel Barcodes (1D Scanner) in Appendix.