Newland BS8060 Piranha, User Manual

Page: 196 / 232

182
Code ID Prefix
Code ID can also be used to identify barcode type. Unlike AIM ID, Code ID is user programmable. Code
ID can only consist of one or two English letters.
Enable Code ID Prefix Disable Code ID Prefix (default)
Restore All Default Code IDs
For the information of default Code IDs, see Code ID Table (2D Scanner) in Appendix.
Restore All Default Code IDs
Modify Code ID
Code ID of each symbology can be programmed separately. See the following example to learn how to
program a Code ID.
Example: Set the Code ID of PDF417 to
“p”
1. Check the hex value of
“p” in the ASCII Table. (“p”: 70)
2. Scan the Modify PDF417 Code ID barcode.
3. Scan the numeric
barcodes “7” and “0” from
Digit Barcodes (2D Scanner) in Appendix.
4. Scan the Save barcode from Save/Cancel Barcodes (2D Scanner) in Appendix.