Newland BS8060 Piranha, User Manual

Page: 176 / 232

162
Set Length Range for QR Code
The scanner can be configured to only decode QR Code barcodes with lengths that fall between
(inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and
maximum lengths.
If minimum length is set to be greater than maximum length, the scanner only decodes QR Code
barcodes with either the minimum or maximum length. If minimum length is same as maximum length,
only QR Code barcodes with that length are to be decoded.
Set the Minimum Length Set the Maximum Length
Example: Set the scanner to decode QR Code barcodes containing between 8 and 12 characters
1. Scan the Set the Minimum Length barcode.
2. Scan the numeric
barcode “8” from
Digit Barcodes (2D Scanner) in Appendix.
3. Scan the Save barcode from Save/Cancel Barcodes (2D Scanner) in Appendix.
4. Scan the Set the Maximum Length barcode.
5. Scan the numeric barcodes
“1” and “2” from
Digit Barcodes (2D Scanner) in Appendix.
6. Scan the Save barcode from Save/Cancel Barcodes (2D Scanner) in Appendix.