Newland BS8060 Piranha User Manual Download Page 65

Page: 65 / 232

EAN-13 Beginning with 414/419 Add-On Code Required

This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that

begin with a

“414” or “419”. The following settings can be programmed:

Require Add-On Code:

All EAN-13 barcodes that begin with a

“414” or “419” must have a 2-digit or

5-digit add-on code. The EAN-13 barcode with the add-on code is then transmitted. If the required add-on

code is not found, the EAN-13 barcode is discarded.

Do Not Require Add-On Code:

If you have selected

Require Add-On Code

, and you want to disable

this feature, scan

Do Not Require Add-On Code

. EAN-13 barcodes are handled, depending on your

selection for the

“2 or 5-Digit Add-On Code” feature.

Do Not Require Add-On Code

(default)

Require Add-On Code

EAN-13 Beginning with 434/439 Add-On Code Required

This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that

begin with a

“434” or “439”. The following settings can be programmed:

Require Add-On Code:

All EAN-13 barcodes that begin with a

“434” or “439” must have a 2-digit or

5-digit add-on code. The EAN-13 barcode with the add-on code is then transmitted. If the required add-on

code is not found, the EAN-13 barcode is discarded.

Do Not Require Add-On Code:

If you have selected

Require Add-On Code

, and you want to disable

this feature, scan

Do Not Require Add-On Code

. EAN-13 barcodes are handled, depending on your

selection for the

“2 or 5-Digit Add-On Code” feature.

Do Not Require Add-On Code

(default)

Require Add-On Code

Summary of Contents for BS8060 Piranha









































































































































































































































Search results

Summary of Contents for BS8060 Piranha

Reviews:

Related manuals for BS8060 Piranha

Brands by name

Popular brands

Newland BS8060 Piranha, User Manual

Search results

Summary of Contents for BS8060 Piranha

Reviews:

Related manuals for BS8060 Piranha

Brands by name

Popular brands