- 8 -
www.NewLeader.com
(800) 363-1771
301321-AA-I
SUPER P
Safety
Safety Alert Symbols
Take note! This safety alert symbol found throughout this manual is used to call your
attention to instructions involving your personal safety and that of others� Failure to follow
these instructions can result in injury or death�
In this manual and on the safety signs placed on the unit, the words “DANGER,” “WARNING,” “CAUTION,”
and “NOTICE” are used to indicate the following:
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury�
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury�
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury�
NOTICE is used to address practices not related to physical injury�
NOTE:
Provides additional information to simplify a procedure or clarify a
process�
Important Safety Information
Before using this equipment, read, understand and follow all instructions in the Operator’s
Manual provided with this equipment� If the user and/or assistants cannot read or
understand the warnings and instructions, the employer of the user and/or assistants must
provide adequate and necessary training to ensure proper operation and compliance with
all safety procedures pertaining to this equipment� If Operator’s Manual has been lost,
visit www�newleader�com or call your authorized dealer or our Product Sales & Support
Department at (800) 363-1771 for replacements� Serious injury or death can result from the
failure to read, understand, and follow instructions provided in this manual�
Figure 1�1 - The need for safety cannot be stressed strongly enough
in this manual� At New Leader Manufacturing, we urge you to make
safety your top priority when operating any equipment. We firmly
advise that anyone allowed to operate this machine carefully read, learn
and understand all messages and information in this manual and on
machine’s safety decals before operating machine, as well as familiarize
themselves with the location and function of all machine controls�
Figure 1�1
The following guidelines are intended to cover general usage and to assist you in avoiding accidents�
There will be times when you will run into situations that are not covered in this section� At those times
the best standard to use is common sense� If, at any time, you have a question concerning these
guidelines, please call your authorized dealer or our Product Sales & Support Department at (800) 363-
1771�
