- 24 -
www.NewLeader.com
(800) 363-1771
301321-AA-I
SUPER P
Installation Instructions Continued
Lifting the Spreader
Use only lifting devices that meet or exceed OSHA standard 1910�184 or ASME B30�20-
2006� Never lift equipment over people� Never lift unit with anything or anybody in
the body� Loads may shift or fall if improperly supported� Failure to comply with this
requirement could result in death or serious injury�
Do not use lifting device to free unit from a chassis, storage stands or frozen ground, or to
lift the chassis in any way� Shock loading is prohibited and sudden accelerations should be
avoided� Failure to follow this requirement may result in injury or machine damage�
Always inspect unit lift points for signs of wear, cracking, corrosion, gouges, alterations, or distortion�
Always use a sling, spreader bar, or lifting bar that
attaches to the lifting points with a minimum of
60 degrees from horizontal� It is preferable to use
an “H” style lifting bar that keeps the attaching
chains in a near vertical orientation as shown in
Figure 1� Operators of lifting devices must be
qualified and knowledgeable in their use and
application�
Position the truck with adequate room around
the unit� Work in an environment that permits
clear communication to others nearby. Keep area
clear of persons when loads are to be lifted and
suspended� Do not allow the lifted load to come
in contact with any obstruction�
Store units on a solid surface using appropriate
storage stands when not installed�
Figure 1 - Lifting Bar
