New Holland E26C, Operator'S Manual

Page: 41 / 282

2 - SAFETY INFORMATION
(3B) Engine access door support caution - High pressure
hoses and radiator
WARNING
Burn hazard!
Before performing any service on the hy-
draulic system, you must allow it to cool.
Hydraulic fluid temperature should not ex-
ceed 40 °C (104 °F).
Failure to comply could result in death or se-
rious injury.
W0241A
WARNING
Pressurized system!
Never attempt to drain fluids or remove filters
when the engine is running. Turn off the en-
gine and relieve all pressure from pressurized
systems before servicing the machine.
Failure to comply could result in death or se-
rious injury.
W0905A
WARNING
Escaping fluid!
Hydraulic fluid or diesel fuel leaking under
pressure can penetrate the skin and cause
infection or other injury. To prevent personal
injury:
Relieve all pressure before discon-
necting fluid lines or performing work on the
hydraulic system. Before applying pressure,
make sure all connections are tight and all
components are in good condition. Never use
your hand to check for suspected leaks under
pressure. Use a piece of cardboard or wood
for this purpose. If injured by leaking fluid,
see your doctor immediately.
Failure to comply could result in death or se-
rious injury.
W0178A
SMIL19MEX0749AA
6
Location: this signs is located on the engine access door
support.
Quantity: 1
Part number: 91MK-07112
This sign warns you not to loosen the high pressure
hoses, not to touch the radiator, and not to remove the
radiator cap before the temperature of the cooling system
drops.
Start working after the cooling system is sufficiently cooled
down.
2-21