1 - GENERAL INFORMATION
1 - GENERAL INFORMATION
###_1_###
Note to the Owner
Improper operation of this machine can cause injury or death. Before using this machine, make certain that every
operator:
• Is instructed in safe and proper use of the machine.
• Reads and understands the Manual(s) pertaining to the machine.
• Reads and understands ALL Safety Decals on the machine.
• Clears the area of other persons.
• Learns and practices safe use of machine controls in a safe, clear area before operating this machine on a job site.
It is your responsibility to observe pertinent laws and regulations and follow NEW HOLLAND CONSTRUCTION in-
structions on machine operation and maintenance.
Your machine has been designed and built to the highest standards of quality. It conforms to all current safety reg-
ulations. However, the risk of accidents can never be completely excluded. That is why it is essential to observe
elementary safety rules and precautions.
Read this manual carefully, paying particular attention to the instructions concerning safety, operation and mainte-
nance so as to avoid the risk of injury while operating or servicing the machine.
The standard attachments and tools of this machine are designed to carry out earthmoving and rehandling operations.
If you want to use this machine to handle a load (pipes, culverts, formwork, etc.), make sure that it is designed to
carry out this kind of work. For this type of application, the machine must be equipped with safety valves, an overload
indicator, a load handling chart corresponding to the type of machine and its attachment, and a load fixing point. All
legal requirements must also be strictly observed.
Do not use this machine for any application or purpose other than those described in this manual. If the machine is to
be used for work involving the use of special attachments, accessories, or equipment, consult your NEW HOLLAND
CONSTRUCTION Dealer in order to make sure that any adaptations or modifications made are in keeping with the
machine's technical specifications and with prevailing safety requirements.
Any modification or adaptation which is not approved by NEW HOLLAND CONSTRUCTION may invalidate the ma-
chine's initial conformity with safety requirements.
The machine must undergo regular inspections, the frequency of which varies according to the type of use. Consult
your NEW HOLLAND CONSTRUCTION Dealer.
NOTICE:
The engine and fuel system on your machine is designed and built to government emissions standards.
Tampering by dealers, customers, operators and users is STRICTLY PROHIBITED BY LAW. Failure to comply could
result in government fines, rework charges, invalid warranty, legal action and possible confiscation of the machine
until rework to original condition is completed. Engine service and/or repairs must be done by a certified technician
only.
Your NEW HOLLAND CONSTRUCTION Dealer is at your disposal for any further information. They will also provide
any after-sales service you may require, and genuine NEW HOLLAND CONSTRUCTION spare parts, your guarantee
of quality and match.
NEW HOLLAND CONSTRUCTION customer assistance is also available. Go to www.newholland.com
You can obtain manuals on the operation, maintenance and repair of your machine from your NEW HOLLAND CON-
STRUCTION Dealer. To ensure quick and efficient service, consult your NEW HOLLAND CONSTRUCTION Dealer
for assistance in ordering the correct manuals for your machine.
Always give the type and the Product Identification Number (PIN) of your machine so that your NEW HOLLAND
CONSTRUCTION Dealer can supply you with the right manuals for your machine.
NEW HOLLAND CONSTRUCTION reserves the right to make changes in the specification and design of the machine
without prior notice and without incurring any obligation to modify units previously sold.
1-1
Summary of Contents for E26C
