9 - ACCESSORIES
Attachment engagement
WARNING
Misuse hazard!
Follow the operating instructions in this chap-
ter. Any other practice that has not received
the prior approval of the manufacturer is con-
sidered to be strictly forbidden.
Failure to comply could result in death or se-
rious injury.
W0281A
WARNING
Crushing hazard!
This operation may be dangerous. You are ad-
vised to wear suitable clothing and respect all
relevant safety messages.
Failure to comply could result in death or se-
rious injury.
W0283A
WARNING
Cutting hazard!
This operation could be dangerous.
Do not put your hands near the mobile plate.
If the mobile plate is not properly locked in
the engaged position, the mobile plate could
suddenly disengage.
Failure to comply could result in death or se-
rious injury.
W1491A
To engage the attachment to the quick coupling system:
1. Make sure that the machine and the bucket to be used
are on a flat solid ground.
NOTICE:
before using an attachment, make sure that
its total weight when fully loaded DOES NOT EXCEED
the maximum lift capacity of the machine.
SMIL16MEX3210AB
1
2. Before attaching any equipment, the locking plate of
the quick coupling must be prepared. Operate the arm
controls, arm and bucket to position the quick coupling
horizontally at a height of about
1 m
(
3.3 ft
) from the
ground. Lock all machine controls, down from the cab,
and take the release tool. Insert the release tool in the
locking plate as shown in figure opposite.
NOTE:
use the release tool
(2)
to move the locking
plate into its engage position.
SMIL16MEX3211AB
2
9-26
Summary of Contents for E26C
