New Holland E26C, Operator'S Manual

Page: 124 / 282

4 - OPERATING INSTRUCTIONS
Use care so that the bucket does not damage the rubber
track while working.
Do not move the machine pressing the bucket against a
concrete surface or walls.
Lower the machine slowly, if it had previously been lifted
by means of the attachment.
LELI11E00265AA
7
If the machine is operated in salty corrosive places, the
core metal can detach easily. Do not use the rubber track
under such circumstances. If the rubber tracks come in
contact with these substances wash them with water.
The rubber tracks have to be used with a temperature
range between
-25 °C ( -13 °F ) and +55 °C ( 131 °F ).
NOTE: Use the rubber tracks under proper tension, to
prevent them from coming off the rollers. Operate the
rubber track carefully even when tensioning is proper.
LELI11E0266AA
8
Avoid changing direction of the machine on places with
different level (about
20 cm ( 7.87 in )). To overcome the
gap, place the machine perpendicular to the obstacle.
LELI11E0267AB
9
If approaching a slope in reverse is unavoidable, make
sure not to make turns and not to change the travel di-
rection while climbing between the level ground and the
slope.
LELI11E0268AB
10
4-18