Proper Use
21
If the bone conduction amplifier (NS032201.012) is used, connect
it to the
Neuro-Audio
electronic unit with a cable (NS032103.011). The bone vibrator
should be connected to the corresponding connector of the bone conduction amplifier
(Fig. 5 and Fig. 6). And the bone conduction amplifier itself should be connected
to the PSU-9 power supply unit (NS057201.009) to operate from the mains or you can
operate it from the built-in batteries.
When you install the program for the first time, the window shown in Fig. 11 will
appear on the screen. Check the
Always trust software from “Neurosoft LLC
checkbox
and press
Install
.
Fig. 11.
Windows Security
window
When the system is connected for the first time, the message box will appear
in the right bottom corner of the taskbar (Fig. 12).
Fig. 12. Installation completed
3. Proper
Use
3.1. Setting-Up Procedures
The operating limitations are given in Table 4 (see Operating conditions).
Before power supply is turned on, make sure the electronic unit and computer
enclosures have no apparent mechanical failures that can be dangerous.
Switching On Power Supply and Testing Digital System
To switch on the power supply of the system, press
Power
on your PC. The electronic
unit has no power supply switch and is constantly connected to PC. The power supply