NETZSCH LFA 447 Nanoflash, Operating Instructions Manual

Page: 14 / 89

General Information
LFA 447
TM
01/09 J:\LFA447\CHAPTER1.DOC
12
GAS CONTAINERS
The content of the container is primarily identified by a label
attached to the container shoulder and secondarily by the color of
the container. The Air Products identification colors for containers
containing nitrogen are:
Body: French gray; shoulder and guard: black (BS 349: 1973)
The following practices are recommended for safe handling and
storage of high-pressure gases including nitrogen containers.
General
−
Only trained persons should handle compressed gases.
−
Observe all regulations and local requirements regarding the
storage of containers.
−
Do not remove or deface labels provided by the supplier for the
identification of the container contents.
−
Ascertain the identity of the gas before using it.
−
Know and understand the properties and hazards associated
with each gas before using it.
−
Establish and implement plans to cover any emergency
situations that might arise.
−
When doubt exists as to the correct handling procedure for a
particular gas, contact the supplier.
Handling and Use
−
Wear stout gloves.
−
Never lift a container by the cap or guard unless the supplier
states it is designed for that purpose.
−
Use a trolley or other suitable device or technique for
transporting heavy containers, even for a short distance.
−
Leave valve protection caps or guards (where provided) in place
until the container has been secured against a wall or bench or
placed in a stand and is ready for use.
−
Where necessary, wear suitable eye and face protection. The
choice between safety glasses, chemical goggles, or full face
shield will depend on the pressure and nature of the gas being
used.