Network Technologies ENVIROMUX IPDU-Sx Installation And Operation Manual Download Page 64

Page: 64 / 119

NTI Secure Remote Power Reboot Switch

Support

The Support section of the menu includes two links, Manual and Downloads.

The Manual link will open the pdf manual for the IPDU-Sx on the NTI website.

You must have Adobe Reader installed on your PC to open this.

The Downloads link will take you to the Firmware Downloads page for the IPDU-Sx

on the NTI website. All versions of firmware and MIB files for the IPDU-Sx will be found

there, available for immediate download to your PC.

Figure 62- Support

Logout

To logout of the IPDU-Sx user interface, click on the “Logout” section in the menu.

A gray menu label will drop down. Click on the gray label to be immediately

logged out. The login screen will appear, at which you can close your browser

or log back in.

Figure 63- Logout

Summary of Contents for ENVIROMUX IPDU-Sx
























































































































Search results

Summary of Contents for ENVIROMUX IPDU-Sx

Reviews:

Related manuals for ENVIROMUX IPDU-Sx

Brands by name

Popular brands

Network Technologies ENVIROMUX IPDU-Sx, Installation And Operation Manual

Search results

Summary of Contents for ENVIROMUX IPDU-Sx

Reviews:

Related manuals for ENVIROMUX IPDU-Sx

Brands by name

Popular brands