NTI Secure Remote Power Reboot Switch
4
IPDU-S4 / IPDU-S8
1. LED Indicators
•
"POWER" (green)
—
indicates device is powered
•
"SENSOR FAULT" (red)
—
illuminates if a sensor goes out of range of a configurable threshold
•
"IP FAULT" (red)
—
illuminates if an IP device is unresponsive
•
“TRIP” (red) -illuminates if the circuit breaker on the rear of the unit trips OFF
2.
RJ45 Sensors
- RJ45 female- for attachment of temperature, humidity, or liquid detection sensors
3.
Console
- RJ45 female- for connection to a terminal for local control
4.
Ethernet
- RJ45 female with LED indicators- for connection to an Ethernet for remote multi-user control and monitoring
Yellow LED- indicates 100Base-T activity when illuminated, 10Base-T activity when dark
Green LED – illuminated when Ethernet link is present, strobing indicates activity on the Ethernet port
5.
AC IN
- 120V AC line cord (15A maximum load (–P15 models only)
The IPDU-S4/S8-P10 has a IEC320-C14 socket (item 5 on the IPDU-S2)
6.
AC OUT 1-8
- NEMA 5-15R outlets (-P15 models) or IEC 320-C13 outlets (-P10 models) - for connection of load device cables
6a
. Green LED
- illuminates when associated outlet power is ON (1 per outlet)
7.
USB
- USB Type A port- for connection of a GSM modem for SMS communication and/or flash drive (USB 2.0 Full Speed
supported) for logging data
8.
Circuit Breaker-
15A
Circuit breaker for protection of the devices powered by the IPDU-Sx
9.
Cascade
- RJ45 Female- for cascading multiple IPDU-S4 and IPDU-S8 units
10.
LED Display
- for displaying the total AC current being supplied by the AC outlets on the IPDU-Sx
