NTI Secure Remote Power Reboot Switch
7
Front Panel LEDs Indicate Status
With proper connections made, the IPDU-Sx is now ready to use. With the power cord attached and plugged into an AC outlet,
the “Power” , “Outlet 1” and “Outlet 2” green LEDs should be illuminated on the front of the IPDU-S2. The table below describes
the function of each LED.
The IPDU-S4 and IPDU-S8 have a green LED adjacent to each outlet that will illuminate when power is ON to the outlet. (See
page 4.)
Figure 5- LEDs on front of IPDU-S2
LED
Description
Power-green
Indicates the power status of the IPDU-Sx
Outlet 1 and 2-red
Illuminates when the AC OUT (1 or 2) is powered OFF
Outlet 1 and 2-green
Illuminates when the AC OUT (1 or 2) is powered ON
Sensor Fault-red
Illuminates if the connected sensors are outside of their thresholds
IP Fault- red
Illuminates if there is an IP monitoring fault
Trip - red
Illuminates if the breaker on the IPDU-S4/8 trips
Total Outlet Current
Displays total current draw of all outlets (IPDU-S4/ -S8 only)
Figure 6- LEDs on front of IPDU-S4/S8
Power
1
2
Outlet
Fault
Sensor
IP
NTI
R
Network Technologies Inc
Fault
Reset
Fault
Sensor
Power
IP
Fault
Trip
RJ45 Sensors
Total Outlet
Current
