Netscape NETSCAPE MANAGEMENT SYSTEM 4.5, Installation And Setup Manual

Page: 635 / 866

Configuring a Certificate Manager to Publish Certificates and CRLs
Chapter 19 Setting Up LDAP Publishing 635
3.
Follow the instructions in the file and add the mapping information for the
entry you added.
The figure above shows the following mapping rule being added to the file:
certmap myCA CN=rootCA, O=siroe.com
#myCA:DNComps
myCA:FilterComps
This mapping rule specifies that if the name of the CA that signed the
certificate used for SSL client authentication by the Certificate Manager is
myCA
and that the issuer name or DN of the CA is
CN=rootCA, O=siroe.com
, the
server should use the
FilterComps
attributes to locate the entry.
If you determine that the
certmap.conf
file needs an empty
DNComps
mapping
(because your certificate subject name has no overlap with the corresponding
directory DN), you may need to modify the default base DN in Directory
Server by adding the following to the Directory Server configuration file:
dn: cn=config
changetype: modify
replace: nsslapd-certmap-basedn
nsslapd-certmap-basedn: dc=siroe, dc=com
4.
Save your changes, and close the file.