Netscape NETSCAPE MANAGEMENT SYSTEM 4.5, Installation And Setup Manual

Page: 571 / 866

Configuring a Subsystem to Run Automated Jobs
Chapter 17 Scheduling Automated Jobs 571
2.
Select a module.
For the purposes of this instruction, assume that you selected the
RenewalNotificationJob
module.
3.
Click Next.
The Configure Job Instance Parameters window appears. It lists the
configuration information required for this job.
4.
Enter the appropriate information.
Job Instance ID. Type a unique name that will help you identify the job. Be
sure to formulate the name using any combination of letters (aA to zZ), digits
(0 to 9), an underscore (_), and a hyphen (-). For example, you can type
My_Job
or
MyJob
as the instance name, but not
My Job
.
enabled. To enable the job, type
true
; to disable the job, type
false
.
cron. Specifies the cron specification for when this job should be run. In other
words, it specifies the time at which the Job Scheduler daemon thread should
check the certificates for sending renewal notifications. For example,
03**1-5
.