Netscape NETSCAPE MANAGEMENT SYSTEM 4.5, Installation And Setup Manual

Page: 322 / 866

Restarting Certificate Management System
322 Netscape Certificate Management System Installation and Setup Guide • October 2001
Stopping From the Windows NT Services Panel
You can stop a CMS instance running on a local host by stopping the
corresponding service; it is identified by the following in the Windows NT Services
panel (see Figure 8-1 on page 319):
Netscape Certificate Management System (cert-<instance_id>
)
To stop Certificate Management System from the Windows NT Services panel:
1.
Click the Start button on your desktop.
2.
Select Control Panel from Settings.
3.
In the Control Panel window that appears, click Services.
4.
Select the CMS instance and click Stop.
5.
When prompted, click Yes.
The server is stopped.
Restarting Certificate Management System
Whenever you change the CMS configuration, you must save your changes (by
clicking the Save button) for the changes to take effect. Some configuration changes
also require that you restart the server after you save the changes. If restarting is
required, the server prompts you accordingly.
You can restart the server in two ways:
• From the CMS window (locally and remotely)
• From the command line (locally only)
Restarting From the CMS Window
You can use the CMS window to restart an instance of Certificate Management
System on a local or remote host.
To restart Certificate Management System from the CMS window:
1.
Log in to the CMS window (see “Logging In to the CMS Window” on
page 343).