Netscape NETSCAPE MANAGEMENT SYSTEM 4.5, Installation And Setup Manual

Page: 375 / 866

Configuring Port Numbers
Chapter 11 Setting Up Ports 375
2.
Select the Configuration tab.
The Network tab appears.
3.
To change the administration port number, enter the port number in the
Administration section:
SSL port. Type a TCP/IP port number. Certificate Management System uses
this port for SSL-enabled communications with the CMS window—that is,
HTTPS requests from administrators. Make sure the port number you specify
is unique on the host system.
Backlog. Type the number of connections that can be waiting to be serviced at
the administration port. The default number is 15. The number you enter in
this field is passed to the operating system’s
listen()
call.
To change the agent port number, enter the port number in the Agent section:
SSL port.
Type a TCP/IP port number. Certificate Management System uses
this port for SSL-enabled communications with the Agent Services
interface—that is, HTTPS requests from agents. Make sure the port number
you specify is unique on the host system.
Backlog.
Type the number of connections that can be waiting to be serviced at
the agent port. The default number is 15. The number you enter in this field is
passed to the operating system’s
listen()
call.