Netscape NETSCAPE MANAGEMENT SYSTEM 4.5, Installation And Setup Manual

Page: 320 / 866

Stopping Certificate Management System
320 Netscape Certificate Management System Installation and Setup Guide • October 2001
To start Certificate Management System from the Windows NT Services panel:
1.
Click the Start button on your desktop.
2.
Select Control Panel from Settings.
3.
In the Control Panel window that appears, click Services.
4.
Select the CMS instance and click Start.
You are prompted to supply the single sign-on password for the server.
5.
Enter the single sign-on password you specified during installation and click
OK.
Certificate Management System won’t start until you provide this password.
For more information, see “Required Start-up Information” on page 312.
Stopping Certificate Management System
You can stop Certificate Management System in several ways:
• From Netscape Console (locally and remotely)
• From the command line (locally only)
• On a Windows NT system, from the Windows NT Services panel
Stopping Certificate Management System shuts down all the subsystems
completely, interrupting service until the server is started again. If your machine
crashes or is taken offline, the server stops, and any requests it was servicing are
lost. You need to start the server again to restore service.
Stopping From Netscape Console
You can use Netscape Console to stop an instance of Certificate Management
System running on a local or remote host.
To stop Certificate Management System from Netscape Console:
1.
Log in to Netscape Console (see “Logging In to Netscape Console” on
page 336).
2.
In the Console tab, select the Server Group that contains the CMS instance you
want to stop.