Netscape NETSCAPE MANAGEMENT SYSTEM 4.5, Installation And Setup Manual

Page: 291 / 866

Cloning a Certificate Manager
Chapter 7 Installing and Uninstalling CMS Instances 291
If you want to install your clone Certificate Manager on the same host on which the
master Certificate Manager is installed, but in a different server group:
1.
In the master Certificate Manager host machine, go to the directory that
contains the CMS
setup
program.
2.
Run the
setup
program. For instructions, see “Stage 1. Running the Installation
Script” on page 219. Be sure to follow these guidelines:
❍
When prompted to chose a server root or the location for the installation,
specify a different directory/folder (than the one where the master
Certificate Manager is installed). For example, if your master Certificate
Manager is installed at
/u/netscape/server4
, you can specify
/u/netscape/server4_clone1
as the server root for the clone instance.
❍
When prompted to specify a configuration directory, select the option for an
existing directory and specify the host name and port number of the
Directory Server instance used by the master Certificate Manager.
❍
When prompted to specify a port number for the Administration Server,
be sure to specify distinct port number; each server group is managed by a
separate Administration Server. Note the port number as you will need
this later to log in to Netscape Console.
Installing Clone CA on a Separate Host
If you want to install your clone Certificate Manager on a different host than the
one on which the master Certificate Manager is installed, you should run the CMS
setup
program on that host. For instructions, see “Stage 1. Running the Installation
Script” on page 219. (Note that you only need to complete Stage 1 and then proceed
to “Step 3. Shutdown the Master CA” below.)
Step 3. Shutdown the Master CA
Stop the master Certificate Manager. If you need instructions, see “Stopping
Certificate Management System” on page 320.