Management
73
ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
The wireless access point reboots. The reboot process typically takes about one minute.
When the Test LED turns off, wait a few more seconds before doing anything with the
wireless access point.
Change the Administrator Password
The default password is
password
. NETGEAR recommends that you change this password
to a more secure password. You cannot change the administrator login name (admin).
The ideal password contains no dictionary words from any language and is a mixture of
letters (both uppercase and lowercase), numbers, and symbols. Your password can be up to
30 characters.
To change the administrator password:
1.
Select
Maintenance > Password > Change Password
.
The Change Password screen displays:
2.
Take one of the following actions:
•
Enter a new password twice, once in the New Password field and again in the Repeat
New Password field.
•
Next to Restore Default Password, select the
Yes
radio button to restore the default
password. By default, the No radio button is selected.
3.
Click
Apply
.
If you have restored the default password, the login password is
password
. If you have
configured a new password, write it down in a secure place.
Enable the Syslog Server
If you have a syslog server on your LAN, the Syslog screen allows you to enable the syslog
option. If syslog is enabled, the wireless access point sends its syslog files to the syslog
server.
