Installation and Basic Configuration
26
ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
2.
Select one of the following 2.4GHz Band radio buttons:
•
11b
. Both 802.11n- and 802.11g-compliant devices can connect to the access point
because they are backward compatible.
•
11
bg
. 802.11n-compliant devices can connect to the access point because they are
backward compatible.
•
11ng
. This is the default setting. 802.11b-compliant devices cannot connect to the
access point. If you keep the default setting, go to
Step
5
.
When you change the wireless mode, the Turn Radio On check box is automatically
cleared, and all fields, buttons, and drop-down menus onscreen are masked out.
3.
Turn on the radio by selecting the
Turn Radio On
check box.
A pop-up screen displays.
Note:
Under normal conditions, you want the radio to be turned on. Turning off
the radio disables access through the wireless access point, which can be
helpful for configuration, network tuning, or troubleshooting activities.
4.
Click
OK
to confirm the change of wireless mode.
The change does not take effect until you click the Apply button after you have completed
the wireless configuration.
