Installation and Basic Configuration
21
ProSAFE Dual Band Wireless-N Access Point with RFID Support, WNDAP380R
2.
Configure the settings as explained in the following table:
Setting
Description
Time Zone
Select the time zone to match your location.
Current Time
This is a nonconfigurable field that displays the current date and time.
NTP Client
Enable the Network Time Protocol (NTP) client to synchronize the time of the
wireless access point with an NTP server. By default the Enable radio button is
selected.
Use Custom NTP Server
Select this check box if you want to use a custom NTP server.
Hostname /
IP Address
Enter the host name or IP address of the custom NTP server.
The default NTP server depends on the selected time zone.
For example, for China the default is time-e.netgear.com.
3.
Click
Apply
.
Configure the IP Settings
WARNING:
If you enable the DHCP client, the IP address of the wireless
access point changes when you click Apply, causing you to lose
your connection to the wireless access point. You then need to
use the new IP address to reconnect to the wireless access point.
Note:
You need to have an Internet connection to use an NTP server that is
not on your local network.
Note:
If you use a host name, make sure that you have
configured a DNS server. For more information, see the next
section.
