NETGEAR Nighthawk R6700v2 User Manual Download Page 13

Page: 13 / 229

•

Reset button. For information about using the Reset button, see

Return the Router to Its Factory Default

Settings

on page 160.

•

Ethernet LAN ports. Use the four Gigabit Ethernet RJ-45 LAN ports to connect the router to LAN
devices.

•

WAN port. Use the yellow Gigabit Ethernet RJ-45 WAN port to connect the router to a modem.

•

Power On/Off button. Press the Power On/Off button to provide power to the router.

•

DC power connector. Connect the power adapter that came in the product package to the DC power
connector.

USB Port on the Front Panel

A USB 3.0 port is located on the front of the router.

Figure 3. USB 3.0 port

Hardware Overview of the Router

Nighthawk AC1750 Smart WiFi Router Model R6700v2

Summary of Contents for Nighthawk R6700v2






































































































































































































































Search results

Summary of Contents for Nighthawk R6700v2

Reviews:

Related manuals for Nighthawk R6700v2

Brands by name

Popular brands

NETGEAR Nighthawk R6700v2, User Manual

Search results

Summary of Contents for Nighthawk R6700v2

Reviews:

Related manuals for Nighthawk R6700v2

Brands by name

Popular brands