NETGEAR Nighthawk AX6 AX4300 User Manual Download

Page: 132 / 162

c. Select the local area connection and change its name (not its device name) to

NETGEAR-VPN.

If you do not change the VPN interface name, the VPN tunnel connection will fail.

For more information about using OpenVPN on your Windows computer, visit
https://openvpn.net/index.php/open-source/documentation/howto.html#quick.

Install OpenVPN Software on Your Mac Computer

You must install this software on each Mac computer that you plan to use for VPN
connections to your router.

To install VPN client software on your Mac computer:

1. Launch a web browser from a computer or mobile device that is connected to the

router network.

2. Enter http://www.routerlogin.net.

A login window opens.

3. Enter the router user name and password.

The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

4. Select ADVANCED > Advanced Setup > VPN Service.

The VPN Service page displays.

5. Make sure that the Enable VPN Service check box is selected.

6. Specify any VPN service settings on the page.

For more information, see Specify VPN Service in the Router on page 128.

7. Click the For non-Windows button to download the OpenVPN configuration files.

8. Visit https://tunnelblick.net/index.html to download the OpenVPN client utility for

Mac OS X.

9. Download and install the file.

10. Unzip the configuration files that you downloaded and copy them to the folder where

the VPN client is installed on your device.
The client utility must ge installed by a user with administrative priviledges.

For more information about using OpenVPN on your Mac computer, visit
https://openvpn.net/vpn-server-resources/installation-guide-for-openvpn-connect-client-on-macos/.

User Manual

132

Use VPN to Access Your Network

Nighthawk AX6 6-Stream AX5400 WiFi Router

Summary of Contents for Nighthawk AX6 AX4300



































































































































































Search results

Summary of Contents for Nighthawk AX6 AX4300

Reviews:

Related manuals for Nighthawk AX6 AX4300

Brands by name

Popular brands

NETGEAR Nighthawk AX6 AX4300, User Manual

Search results

Summary of Contents for Nighthawk AX6 AX4300

Reviews:

Related manuals for Nighthawk AX6 AX4300

Brands by name

Popular brands