58
NetApp AltaVault Cloud Integrated Storage Installation and Service Guide for Physical Appliances
Beta Draft
System components
Internal FRUs
Internal FRUs
The AltaVault controller has many internal FRUs. These FRUs are not hot-swappable. You must perform a clean
shutdown and power down the system before replacing any of these components.
The controller has a FRU map printed on the CPU cover. This FRU map lists all the internal FRUs in the controller
and their general location on the board to find the internal FRUs and their corresponding LEDs quickly.
The following table lists the AltaVault controller’s internal FRUs:
For more information on replacing specific internal FRUs, see
“Replacing internal FRUs” on page 74
.
Internal FRU
Description
Attention LED Label
Boot device
The boot device stores a primary and secondary set of system files (also
called the boot image) that the system uses when it boots.
The attention LED is next to the boot device on the motherboard.
Not applicable
System DIMM
Each AltaVault controller has eight 32G DIMMs. All eight DIMMs must
be installed for the system to be fully functional.
Not applicable
RAID Controller
assemblies
The RAID controller assemblies are high performance PCI express to
12Gb/s SAS cards that provide reliability, high performance, and fault-
tolerant disk subsystem management. The RAID controller assemblies
are installed in PCIe slots 1 and 3.
Not applicable
Real-time clock (RTC)
coin battery
The real-time clock (RTC) coin battery in the controller module provides
power to the real-time clock so that the system’s services and
applications that depend on accurate time synchronization continue to
function properly.
The attention LED is next to the battery on Riser-R.
Not applicable
Summary of Contents for AltaVault Cloud Integrated Storage 4.1
Page 2: ......
