72
NetApp AltaVault Cloud Integrated Storage Installation and Service Guide for Physical Appliances
Beta Draft
System maintenance
Hot-swapping controller power supplies
Important:
Do not use excessive force when sliding the power supply into the chassis; you can damage the connectors on the rear
of the power supply.
4.
Identify power supply components as described in this table:
5.
Push on the power supply to seat it all the way into the chassis, and then push the cam handle to the closed position,
making sure that the cam handle release latch clicks into its locked position.
6.
Reconnect the power cord, and secure it to the power supply using the power cord retainer clip.
7.
Reconnect the power supply cable to the power source.
8.
Turn the on/off switch on the power source and the power supply to the ON (|) position. Verify that the power
supply is working correctly by observing that the power LED is lit green and the fault LED is not lit.
9.
Repeat these steps for the remaining power supplies, if any.
Component
Description
1
Power supply
2
Cam handle release latch
3
Power and fault LEDs
4
Cam handle
5
Power cord locking mechanism
Summary of Contents for AltaVault Cloud Integrated Storage 4.1
Page 2: ......
