NetApp AltaVault Cloud Integrated Storage 4.1, Installation And Service Manual

Page: 59 / 94

NetApp AltaVault Cloud Integrated Storage Installation and Service Guide for Physical Appliances 59
Beta Draft
APPENDIX C
System maintenance
This section provides information on maintaining AltaVault system components. It includes the following sections:

“Migrating data from a SteelStore appliance to an AltaVault appliance” on page 60

“Shutting down controllers” on page 60

“Replacing controllers” on page 60

“Installing a controller in a chassis” on page 64

“Replacing a controller chassis” on page 65

“Hot-swapping controller fan modules” on page 67

“Hot-swapping controller power supplies” on page 70

“Adding an additional RAID group to a configured appliance” on page 73

“Replacing internal FRUs” on page 74

“Replacing a boot device in a controller” on page 75

“Replacing system DIMMs” on page 79

“Replacing RAID controllers” on page 83

“Replacing the RTC clock coin battery” on page 83

“Replacing disk shelf power supplies and other FRUs” on page 86

“Replacing a faulty hard disk drive on an AltaVault AVA400 or AVA800 appliance” on page 86

“Returning failed parts” on page 86

“Disposing of batteries” on page 86
Note: Best practices calls for allowing the replication queue to drain fully to the cloud prior to engaging in maintenance activities.