40
NetApp AltaVault Cloud Integrated Storage Installation and Service Guide for Physical Appliances
Beta Draft
Administrator’s configuration worksheet
Configuration worksheet
2.5
Is connectivity to cloud, in place - Yes/No? Connectivity to the cloud
is mandatory in order for the appliance to be configured. WAN
circuits, firewalls (port 443) etc. must be configured prior to
commencing configuration. If not when will it be in place?
2.6
What is the bandwidth to cloud?
2.7
Encryption key: If you import from another AltaVault appliance, have
key file or contents and key passphrase available (if required).
2.8
Replication interface - Replication interface defaults to the Primary
interface unless another interface is selected and configured.
2.9
Number of shares to be created on the AltaVault appliance.
2.10
CIFS Share Name(s) / naming convention to be used: Specify the
share name(s) to be configured or whether any naming convention is
to be followed.
2.11
Will the AltaVault appliance be part of AD Domain? Yes / No.
If Yes, Domain administrator credentials will be required to join the
AD Domain and the Domain controller must be listed in the “_LDAP
section” in the Primary DNS.
2.12
Username(s) / Groups to be given access to the share
2.13
NFS Export Name / naming convention to be used
2.14
Is NFSv4 Kerberos required? If yes, Kerberos keytab and conf files
are required.
3
Network connectivity
Notes
3.1
Number of 1gbE/10GbE Data Interfaces to be used?
3.2
Specify speed of Data (Backup) LAN - 1Gbe or 10Gbe? Specify if the
Data LAN is be 1gb or 10gb NICs. AltaVault Appliance supports
4x1gb and 4x10gb NICs. IP addresses will be required for each port
depending on type of NIC supplied (4x1gb or 2x10gb).
3.3
Describe the LAN topology for Backup Data to the Appliance:
Flat LAN or VLANs.
3.4
Will Data Interfaces be connected to different subnets / VLANs?
AltaVault does not support VLAN tagging. If multiple VLANs, use a
separate interface for Data Interfaces from each VLAN.
3.5
Do you want to configure a virtual interface (802.3ad link
aggregation) for the Data Interfaces? If so does the LAN switch
support 802.3ad?
3.6
1.
Provide up to 4 x IP address / Netmask / Gateway for each 4x1Gbe
port.
2.
Provide up to 4 x IP addresses / NetMask/Gateway for each 4x10Gbe
port.
3.7
Specify the type of SFP for 10Gbe Optical NICs.
2
Cloud provider credentials and storage configuration
Notes
Summary of Contents for AltaVault Cloud Integrated Storage 4.1
Page 2: ......
