Neousys Technology Nuvo-5002E User Manual Download Page 87

Page: 87 / 128

Nuvo-5000 Series User’s Manual

- 87 -

3.8 Mount your System

Nuvo-5000 series/ Nuvo-5026E series provide versatile ways of mounting. You can use

wall-mounting brackets shipped with the system to mount it on the wall. Neousys also offers

optional DIN rail mounting kit to mount it on a DIN rail. To mount your system controller,

please refer to the instructions listed below.

3.8.1 Mount your System on the Wall

The system is shipped with two wall-mounting brackets as the standard mounting option.

Please follow steps below to mount your system on a flat surface.

1. Get two wall-mounting brackets and four M4 screws from the accessory box. Fix the

mounting brackets to system using M4 screws.

Nuvo-5000 series

Nuvo-5026E/ Nuvo-5026E-PoE

Summary of Contents for Nuvo-5002E

























































































































Search results

Summary of Contents for Nuvo-5002E

Reviews:

Related manuals for Nuvo-5002E

Brands by name

Popular brands

Neousys Technology Nuvo-5002E, User Manual

Search results

Summary of Contents for Nuvo-5002E

Reviews:

Related manuals for Nuvo-5002E

Brands by name

Popular brands