Nuvo-5000 Series User’s Manual
Copyright © 2016 Neousys Technology Inc. All Right Reserved.
- 28 -
2.3 Back Panel I/O Functions
To fit general application requirements, Nuvo-5000 series offers more I/O functions on its
back panel. In this section, we’ll illustrate each I/O function on the back panel.
NOTE
For demonstration purposes, Nuvo-5000 series will be used in most illustrations.
2.3.1 3-Pin Terminal Block for DC and IGN Input
Nuvo-5000 series allows a wide range of DC power input from 8 to 35V via a 3-pin
pluggable terminal block, which is fit for field usage where DC power is usually provided.
And the screw clamping connection of the terminal block gives a very reliable way of wiring
DC power. For detail information of supplying DC power via pluggable terminal block,
please refer to section 3.9.
In addition to DC power input, this terminal block can also accept ignition signal input (IGN)
when MezIO-V20 ignition control module is installed for in-vehicle applications.
Caution
1.
Please make sure the voltage of DC power is correct before you connect it to Nuvo-5000
controller. Supplying a voltage over 35V will damage the system.
