Nuvo-5000 Series User’s Manual
Copyright © 2016 Neousys Technology Inc. All Right Reserved.
- 99 -
4.1.4 Enable TPM Feature
TPM, or Trusted Platform Module, is a hardware-based cryptoprocessor to secure
hardware by integrating cryptographic keys into devices. Nuvo-5000 series is designed with
on-board TPM 2.0 module. As TPM 2.0 requires 64-bit Windows 7/8/10 with UEFI boot
mode, it is disable in BIOS by default. For customers who want to utilize TPM feature, you
shall enable TPM in BIOS as well as install Windows with UEFI mode.
To enable TPM 2.0 feature:
1. When Nuvo-5000 controller boots up, press F2 to enter BIOS setup utility.
2. Go to
[Security]
.
3. Enable TPM by selecting “
Available
” for
[TPM Availability]
option.
4. You will also need to select UEFI boot mode for installing Windows. Please refer to
section 4.1.8 for detail.
