29/33
SI 72
Symptom
Possible cause
Remedy
Refer to page
Machine stops while
Fingers not correctly adjusted.
Check fingers position, adjust if needed.
11
inserting (stoppage at the
Inserted document too long for used envelope.
Check fold settings.
20
inserting point).
Envelope throat incorrect.
Check envelope specifications.
33
Envelope glued inside.
Eliminate faulty envelopes.
33
Window not glued properly.
Eliminate faulty envelopes.
-
Flap not sufficiently
Water level low.
Check water level, refill if needed.
5
moistened.
Brushes dry.
Check brushes, replace if needed by the extra soaked set.
5, 30
Brushes dirty.
Check brushes, clean if needed.
30
Moistening felt dry.
Check the moistening felt, refill water tray if needed.
5
Moistening felt dirty.
Check the moistening felt, clean if needed.
30
Moistening brushes inactive.
Activate the moistening brushes.
11
Envelope not always
Inserted document too big.
Check fold settings, adjust if needed.
20
ejected from sealer.
Document not inserted deep enough.
Check adjustment of envelope stop position and fingers.
10
No document fed.
Feeder empty.
Refill feeder.
8
Separation set too wide.
Adjust the separation.
7
Side guides set too narrow.
Adjust the side guides.
7
Skewed documents fed.
Side guides set too wide.
Adjust side guides.
7
Double documents fed.
Separation set too wide.
Adjust the separation.
7
Documents stoppage at
Stopper position set incorrect.
Adjust stopper position.
8
collating area.
