21/33
SI 72
6.3.3 Letter fold
When letter fold is selected, the display shows the screen
as shown in fig. 45. The following choices are available:
• go to the zig zag folding menu (key 1),
• increase the position of the first fold to the right (key 2),
• decrease the position of the first fold to the left (key 3),
• increase the position of the second fold to the right (key
4),
• decrease the position of the second fold to the left
(key 5),
• confirm the settings by pressing “OK” (key 6) which
will get you back to the “job settings” menu.
The fold length of the first fold can be minimally 75 mm
(2.9 inch) and maximally 25 mm (1.0 inch) less then the
length of the longest document used.
The fold length of the second fold can be minimally the
length of the first fold and maximally 25 mm (1.0 inch) less
then the length of the longest document used.
Fig. 45
6.3.4 Zig-zag fold
When zig-zag fold is selected, the display shows the
screen as shown in fig. 46. The following choices are
available:
• go to the “no fold” menu (key 1),
• increase the position of the first fold to the right (key 2),
• decrease the position of the first fold to the left (key 3),
• increase the position of the second fold to the right (key
4),
• decrease the position of the second fold to the left key
5),
• confirm the settings by pressing “OK” (key 6) which
will get you back to the “job settings” menu.
The fold length of the first fold can be minimally 75 mm
(2.9 inch) and maximally 25 mm (1.0 inch) less then the
length of the longest document used.
The fold length of the second fold can be minimally the
length of the first fold and maximally 25 mm (1.0 inch) less
then the length of the longest document used.
Fig. 46
6.3.5 Double parallel fold
By using the letter fold settings, it is possible to create a
double parallel fold
Key
Key
