SI 72
18/33
6.1.2 Envelope with open flap
When “envelope with open flap” is selected the display
shows the screen as shown in fig. 37. The following
choices are available:
• go to no envelopes screen (key 1),
• increase the envelope height (key 2),
• decrease the envelope height (key 3),
• increase the flap height (key 4),
• decrease the flap height (key 5),
• confirm the settings by pressing “OK” (key 6) which
will get you back to the “job settings” menu.
The envelope height can be set between 90 mm
(3.54 inch) and 162 mm (6.38 inch).
The flap height can be set between 32 mm and the
envelope height minus 32 mm (1.26 inch).
Default the envelope height is set to 162 mm
(6.38 inch) and the envelope flap size is set to 44 mm
(1.73 inch).
Fig. 37
6.1.3 No envelopes
When “no envelopes” is selected, the display shows the
screen as shown in fig. 38. The following choices are
available:
• go to the envelope with closed flap screen (key 1),
• confirm the settings by pressing “OK” (key 6) which
will get you back to the “job settings” menu.
Fig. 38
6.2 Document settings menu
When the “document settings” menu is selected and
confirmed (key 6) in the “job settings” menu, the display
shows the screen as shown in fig. 39.
The following choices are available, by pressing key 1:
1. set number of documents ( )
2. set document size ( )
3. set hopper swap ( )
4. set daily mail on or off ( )
6.2.1 Number of sheets
When number of sheets is selected the following choices
are available (see fig. 39):
• go to document size screen (key 1),
• select a higher feeder number (key 2) (The lowermost
feeder is feeder number one),
• select a lower feeder number (key 3),
• increase the number of documents of the selected
feeder (key 4),
• decrease the number of documents of the selected
feeder (key 5),
• confirm the settings by pressing “OK” (key 6) which
will get you back to the “job settings” menu.
Fig. 39
Key
Key
Key
