17/33
SI 72
6 JOB SETTINGS
After confirmation (key 6) in the “create job” or
“edit job” menu, the display shows the “job settings” menu
as shown in fig. 35. The “job settings” menu shows the
following functions:
• select a setting menu by pressing key 1 or 2,
To program a job use the following order of settings:
1. Envelope settings menu ( )
2. Document settings menu ( )
3. Fold settings menu ( )
4. Double document detection (DFC) settings menu ( )
• select the chosen settings menu to edit (key 3),
• go to the “job name” menu (key 5),
• save the job settings by pressing key 6 which will
automatically get you back to the “job menu”.
Fig. 35
6.1 Envelope settings menu
When the “envelope settings” menu is selected and
confirmed in the “job settings” menu, the display shows the
screen as shown in fig. 36. In this menu, the following
choices are available by pressing key 1:
1. Envelope with closed flap ( )
2. Envelope with open flap ( )
3. No envelopes ( )
6.1.1 Envelope with closed flap
When “envelope with closed flap” is selected the display
shows the screen as shown in fig. 36. The following
choices are available:
• go to the envelope with open flap screen (key 1),
• increase the envelope height (key 2),
• decrease the envelope height (key 3),
• confirm the setting by pressing “OK” (key 6) which will
get you back to the “job settings” menu.
The envelope height can be set between 90 mm
(3.5 inch) and 162 mm (6.38 inch).
Default the envelope size is set to 162 mm (6.38 inch).
Fig. 36
Key
Key