Nederman FlexPAK 800, Setting Manual

Page: 27 / 44

FlexPAK 800/1000
27
EN
4.2.18 PSCFlush
Menu for activating flushing of the duct system. When ‘Switch=Off’, flushing is timer
controlled. When ‘Switch=On’, flushing is contolled by the pilot signal; flushing takes place
when the pilot signal dissapears. See Sections
‘4.2.32 PSIFC’ and ‘4.2.34 FlushTmr’.
ESC OK
PSCFlush 1/1
Switch = Off
Switch=Off is the default setting. PSCFlush is deactivated.
To activate PSCFlush set Switch=On.
4.2.19 BinAuto
Menu for activating the Automatic Emptying of collector Bin interval Timer (AEBTme), see
Section ‘4.2.14 AEBTme’.
ESC OK
BinAuto 1/1
Switch = Off
Switch=Off is the default setting; the BinAuto timer is off.
To activate the AEBTme timer, set Switch=On.
4.2.20 LiAuto
Menu for activating Bin Level Indicator Automatic Emptying of Bin (BLI-Empt), see Section
‘4.2.12 BLI-Empt’.
ESC OK
LIAuto 1/1
Switch = Off
Switch=Off is the default setting; LiAuto is deactivated
To activate LiAuto, set Switch=On.
4.2.21 LSOTmr
Menu for setting the amount of time the TVFD Solenoid Lower Valve (SLV) is open for bin
emptying. LSOTmr is only used if TVFDAdv is activated (Switch=On). This message is only
used when TVFD advanced is activated
NOTE!
LSOTmr cannot be set to a value equal to or greater than TVFDO-Al,
LSOTmr < TVFDO-Al.
ESC OK
LSOTmt 1/1
T = 10:00s
Ta = 00:00s
T=10:00s: Amount of time the SLV to be open. The default setting is 10
seconds.
Ta=00:00: The elapsed time since SLV has been opened.
4.2.22 FlushCy2
Menu for setting the amount of time for automatic flushing of the duct system by flushing
valve 2 (SFV2). FlushCy2 is activated by FlushCy1. ‘T’ is how long flushing valve 2 is open.
ESC OK
FlushCy2 1/1
T = 10:00s
Ta = 00:00s
T=10:00s: Time flush valve 2 (SFV2) is open. The default setting is 10
seconds.
Ta=00:00: The elapsed time since the flushing cycle started.