Installation Manual, Chapter 5 – Installing Dterm Series i Optional Equipment
111
November 2003, A6-506000-642-01(8508), Release 6.0
4.
When an adapter is installed for the first time in a terminal, the base cover on the
Multiline Terminal must be modified. Two adapters can be installed in the Multiline
Terminal, and two separate cutouts are provided. Remove the applicable cutout/
cutouts on the bottom of the base plate with nippers. When only one adapter is
being installed and it needs an ACA-U( ) Unit for power, remove only the right
cutout as shown in
Figure 5-4: Modifying Base Plate for Adapter Installation
S
ECTION
3
I
NSTALLING
A
DAPTERS
3.1
ACA-U( ) Unit (AC Adapter)
This unit provides power to ancillary devices. The ACA-U( ) Unit must be
connected to an adapter that is installed on a Multiline Terminal. When
more than one adapter is installed on a Multiline Terminal, only one ACA-U( )
Unit is necessary.
The power requirements for the ACA-U( ) Unit are:
Input:
240V AC, 50 Hz
Output:
24V DC, 400 mA
Polarity:
Figure 5-4:
Modifying Base Plate for Adapter Installation
Remove for AC
Adapter Plug
Remove for Cables
Connector
Remove for Adapter
+
