manualshive.com logo in svg

NEC Xen alpha, Installation Manual, Page: 126 / 199

Share
Download
NEC Xen alpha Installation Manual Download Page 126

128

Installation Manual, Chapter 6 – Installing DTU-Type Multiline Terminals

A6-506000-642-01(8508), Release 6.0, November 2003

DTU-8D-1A (WH)/(BK) TEL

This digital Multiline Terminal has eight programmable line keys (each with the two-
colour LED), four softkeys, a built-in speakerphone, headset jack, a Large LED to 
indicate incoming calls and messages, and compatibility with ADA-UA, APR-UA, CTA-
BA, and HFU-UA Units.

This terminal is also equipped with a 3-line, 24-character, adjustable Liquid Crystal 
Display (LCD).

Figure 6-2: 

DTU-8D-1A (BK)/(WH) TEL Multiline Terminal

DTU-16D-1A (WH)/(BK) TEL

This digital Multiline Terminal has 16 programmable line keys (each with a two-colour 
LED), four softkeys, a built-in speakerphone, headset jack, a large LED to indicate 
incoming calls and messages, and compatibility with ADA-UA, APR-UA, CTA-BA, and 
HFU-UA Units.

This terminal is also equipped with a 3-line, 24-character, adjustable Liquid Crystal 
Display (LCD).

Figure 6-3: 

DTU-16D-1A (WH)/(BK) TEL Multiline Terminal

Summary of Contents for Xen alpha








































































































































































































Reviews:

No comments