Installation Manual, Chapter 4 – Installing Dterm Series i Multiline Terminals
97
November 2003, A6-506000-642-01(8508), Release 6.0
S
ECTION
7
I
NSTALLING
A
B
UTTON
S
ET
ON
A
M
ULTILINE
T
ERMINAL
The BS(
)-R(
) Unit button set can be changed on a Multiline Terminal to
accommodate other languages, special markings etc.
1.
Remove the plastic cover. (Refer to
Section 9: Removing the Plastic Panel on page 1-95
2.
Remove the existing button pad by pulling up on the tab and lifting the button pad
away from the telephone.
3.
Insert the new button set by sliding it into the grooves located on the inside of the
telephone, then press down on the button set to snap it into place.
4.
Insert the line card and plastic panel on the Multiline Terminal.
Figure 4-13:
Removing the Button Set from a Multiline Terminal
Figure 4-14:
Inserting a New Button Set into a Multiline Terminal