NEC Xen alpha, Installation Manual, Page: 94 / 199

96
Installation Manual, Chapter 4 – Installing Dterm Series i Multiline Terminals
A6-506000-642-01(8508), Release 6.0, November 2003
S
ECTION
6
I
NSTALLING A
D
IRECTORY
C
ARD ON A
M
ULTILINE
T
ERMINAL
A directory card can be attached to D
term
Series i Multiline Terminals. The directory
card can be used to record often dialled numbers or other important information.
1. After recording the information on the lined insert, reinsert it between the plastic
panels of the directory card. Attach the directory card to the directory card holder
as illustrated in
Figure 4-11: Attaching Directory Card to Directory Card Holder .
Note that the open end slides into to the directory card holder.
2. Locate the two grooves on the top of the telephone as illustrated in Figure 4-12:
Attaching Directory Card Holder to the Multiline Terminal . Push the directory card
holder into the grooves on the Multiline Terminal until they snap into place.
To remove the directory card, pinch the two sides of the directory card holder
inward until the tabs release and pull the holder out of the grooves.
Figure 4-11: Attaching Directory Card to Directory Card Holder
Figure 4-12: Attaching Directory Card Holder to the Multiline Terminal
Directory Card
Directory Card
Holder
Multiline Terminal
Grooves
Directory Card Holder