Installation Manual, Chapter 9 – Telephone Programming
199
November 2003, A6-506000-642-01(8508), Release 6.0
Tenant Programming
374
NOT USED
375
NOT USED
376
NOT USED
Programming
Note
To change the default settings, dial the 1 digit trunk Port numbers 1
Ö
6
(function 401
Ö
402) or 2 digit telephone Port numbers 01
Ö
16 (function 403) to
toggle its setting between ‘assigned’ and ‘not assigned’. For example, to
change the setting for telephone Port 10, dial “1” and “0”. Port numbers are
shown in descending order with Port 01 on the right-hand side of the display.
Table 9-5:
Tenant Programming
Function
Number
Function Name and
Telephone Display
Description
Programming Values
401
Trunk Line Assignment
for Tenant 1
P401 TENANT1 CO
654321
Used to specify the trunk
lines assigned as part of the
tenant.
1 = Assigned to Tenant 1
– = Not Assigned to Tenant 1
402
Trunk Line Assignment
for Tenant 2
P402 TENANT2 CO
–
– – – – –
1 = Assigned to Tenant 2
– = Not Assigned to Tenant 2
403
Tenant-to-Telephone
Assignment
P403 TENANT
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Used to assign each
telephone to a tenant. Both
multiline and single line
telephones can be assigned
to a tenant.
1 = Assigned to Tenant 1
– = Assigned to Tenant 2
Table 9-4:
Trunk Telephone Menu Programming (Continued)
Function
Number
Function Name and
Telephone Display
Description
Programming Values
