background image

1

                                                                                                                      12189A-1 

 
 
 
 
 
 
 

OWNER’S MANUAL #   

28507 

ver.

  

12189A-1

 

PAGE #   

1             

English Version

 

IMPORTANT SERVICE INFORMATION   

  

 

Read this manual before attempting to setup or use this instrument.  It contains important 
information regarding safe installation and use.  Keep this manual for future reference.  
Also save the carton, packing and proof of purchase to simplify and accelerate any needed 
action.  If you need assistance or service, call (800) 888-8990 between 8:00 a.m. and 4:30 p.m. 
Pacific Standard Time, Monday through Friday. You can also visit our web site at 
http://www.nwbphones .com for technical support  and information on our other products.    
 

  

WARNING

 

To prevent fire or shock hazard, do not expose this product to rain or any type of excess 
moisture. If accidentally dropped into water, the AC power cord should immediately be 
unplugged from the wall. 
 

 

 

                          

THIS SYMBOL IS INTENDED TO ALERT THE USER OF  

 

THE PRESENCE OF IMPORTANT OPERATING AND 

  

MAINTENANCE (SERVICING) INSTRUCTIONS IN THE 

 

OWNER'S MANUAL

 

 

  

   

 

 

Easy Touch

® 

28507

 

Clock Telephone

 

CARTON CONTENTS 

 

• 

Base & Handset 

 

• 

Handset Cord 

 

• 

Telephone Line Cord 

 

• 

User’s Manual 

 

• 

Warranty Card 

 

• 

Memory Index Card 

 

• 

Accessory Order Form 

 

THIS SYMBOL IS INTENDED TO ALERT THE USER OF 
THE PRESENCE OF UNINSULATED

DANGEROUS 

VOLATAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT 
MAY BE OF SUFFICIENT MAGNTUDE TO CONSTITUTE A 
RISK OF ELECTRIC SHOCK TO PERSONS

.

 

Summary of Contents for Easy Touch 28507

















Reviews: