Connecting Peripheral Devices 5-3
2.
Lower the CRT base onto the docking station.
Lowering the CRT base into place
3.
Carefully center the external monitor on the CRT base or place it on the
desk.
WARNING
Be sure to center the monitor on the CRT base and docking station
(see the following figure). Putting the monitor too close to the edge
can cause the monitor to fall, causing possible harm or damage.
4.
Attach the 15-pin connector on the signal cable to the monitor port on the
docking station.
Summary of Contents for VERSA DOCKING STATION 6000
Page 7: ...vi Contents ...
