NEC VERSA DOCKING STATION 6000 Manual Download Page 9

Page: 9 / 137

1-2 Introducing the NEC Docking Station 6000

*Not shown is a bag containing optional drive signal cables, a power

cable, and an audio cable.

What’s in the box?

NEC DOCKING STATION 6000 FEATURES

The docking station has the following features, which are described in
greater detail in the sections that follow.

Support for full Windows 95 configuration and Plug and Play options.

Support for Windows for Workgroups and MS-DOS 6.22.

Support and on-board connectors for both SCSI and IDE interfaces.

An electronic docking mechanism that makes docking and undocking
easier than ever.

A CRT base that lets you put an external monitor on top of the docking
station to save premium desktop real estate.

Summary of Contents for VERSA DOCKING STATION 6000










































































































































Search results

Summary of Contents for VERSA DOCKING STATION 6000

Reviews:

Related manuals for VERSA DOCKING STATION 6000

Brands by name

Popular brands

NEC VERSA DOCKING STATION 6000, Manual

Search results

Summary of Contents for VERSA DOCKING STATION 6000

Reviews:

Related manuals for VERSA DOCKING STATION 6000

Brands by name

Popular brands