background image

 

 

First Printing — July 1996

Copyright 1996

Copyright 1996

NEC Technologies, Inc.

NEC Corporation

1414 Massachusetts Avenue

7-1 Shiba 5-Chome, Minato-Ku

Boxborough, MA  01719

Tokyo 108-01, Japan

All Rights Reserved

All Rights Reserved

 

PROPRIETARY NOTICE AND LIABILITY DISCLAIMER

 

The information disclosed in this document, including all designs and related materials, is the
valuable property of NEC Corporation (NEC) and/or its licensors. NEC and/or its licensors,
as appropriate, reserve all patent, copyright and other proprietary rights to this document,
including all design, manufacturing,reproduction, use, and sales rights thereto, except to the
extent said rights are expressly granted to others.

 

The NEC product(s) discussed in this document are warranted in accordance with the terms
of the Warranty Statement accompanying each product. However, actual performance of
each such product is dependent upon factors such as system configuration, customer data,
and operator control. Since implementation by customers of each product may vary, the
suitability of specific product configurations and applications must be determined by the
customer and is not warranted by NEC.

 

To allow for design and specification improvements, the information in this  document is
subject to change at any time, without notice. Reproduction of this document or portions
thereof without prior written approval of NEC is prohibited.

MultiSync and Versa are U.S. registered trademarks of NEC Technologies, Inc.

Docking Station 6000 is a U.S. trademark of NEC Technologies, Inc.

All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of their respective

trademark owners.

Summary of Contents for VERSA DOCKING STATION 6000










































































































































Reviews: